reference-signal input

Mira otros diccionarios:

• Signal-to-noise ratio — For signal to noise ratio in statistics, see Cohen s d. Signal to noise ratio (often abbreviated SNR or S/N) is a measure used in science and engineering that compares the level of a desired signal to the level of background noise. It is defined… …   Wikipedia

• Signal integrity — or SI is a measure of the quality of an electrical signal. In digital electronics, a stream of binary values is represented by a voltage (or current) waveform. Over short distances and at low bit rates, a simple conductor can transmit this with… …   Wikipedia

• signal — Synonyms and related words: ALGOL, COBOL, CRT spot, DM display, Doppler signal, EDP, FORTRAN, IF signal, IM display, RF echoes, Roman candle, Teletype, Wirephoto, aid to navigation, alarm, alert, alphabetic data, alphanumeric code, amber light,… …   Moby Thesaurus

• Signal compression — In telecommunication, the term signal compression has the following meanings: In analog (usually audio) systems, reduction of the dynamic range of a signal by controlling it as a function of the inverse relationship of its instantaneous value… …   Wikipedia

• Minimum detectable signal — (MDS) in a radio receiver is the smallest signal power that can be received at its input, processed by its conversion chain and demodulated by the receiver, resulting in usable information at the demodulator output. Contents 1 Equation 2… …   Wikipedia

• Radar signal characteristics — A Radar System uses a Radio Frequency electromagnetic signal reflected from a target to determine information about that target. In any radar system, the signal transmitted and received will exhibit many of the characteristics described below.The …   Wikipedia

• Landing Signal Officer — Landing Signal Officers (LSOs) are naval aviators specially trained to control the approach and landings of airplanes aboard aircraft carriers. Paddles In the U.S. Navy, aircraft carrier operations began with USS Langley (CV 1) in 1922. Langley s …   Wikipedia

• Phase-locked loop — PLL redirects here. For other uses, see PLL (disambiguation). A phase locked loop or phase lock loop (PLL) is a control system that generates an output signal whose phase is related to the phase of an input reference signal. It is an electronic… …   Wikipedia

• Lock-in amplifier — A lock in amplifier (also known as a phase sensitive detector) is a type of amplifier that can extract a signal with a known carrier wave from extremely noisy environment (S/N ratio can be as low as 60 dB or even lessFact|date=December 2007). It… …   Wikipedia

• Analog-to-digital converter — An analog to digital converter (abbreviated ADC, A/D or A to D) is an electronic integrated circuit, which converts continuous signals to discrete digital numbers. The reverse operation is performed by a digital to analog converter… …   Wikipedia

• Flip-flop (electronics) — An SR latch, constructed from a pair of cross coupled NOR gates. Red and black mean logical 1 and 0 , respectively. In electronics, a flip flop or latch is a circuit that has two stable states and can be used to store state information. The… …   Wikipedia